Italpresse Membrane Press Lock-Form Shuttle System Air

TECHNICAL FEATURES

• Weld-free steel ring frame
• Platen size mm. 1450x2800
• Inside-frame dimensions mm. 1330x2680
• Max. thickness mm. 55
• Loading side mm. 1450
• Top-down platen movement
• Movement cylinders nr. 2
• Specific pressure max. kg/cm² 5
• Massive steel platens - thickness mm. 90-100
• Electric heating of platens
• Max temperature °C 150

Complete with:

• Hydraulic system with automatic pressure recovery
• Vacuum system with tank and vacuum pump
• Heating system for press platens with electric elements and oil circulation
• Air pressure system for positive pressing
• Loading tray running on rails
• Aluminum loading tray with channels for pressurized air and vacuum
• Electric system with control board
• PLC to control pressing cycle
• Digital operator interface to set and monitor pressing parameters
• Safety enclosure made of ABS panels with doors for maintenance
• CE SAFETY STANDARDS

OPTIONAL DEVICES

• SECOND LOADING TRAY, ON THE OPPOSITE END OF THE PRESS
• PSS - PIN SUPPORT SYSTEM - Eliminates the need of panel raisers
• AUTOMATIC PIN RESET SYSTEM
• MEMBRANE FRAME for 3-D veneering
• TEFLON COATED TRAY for pre-glued foils
• TRAY DIVIDING BAR to partialize tray usage - crosswise or lengthwise
• BOTTOM PLATEN HEATING for veneering the back side (flat) of the panels
• TOUCH_SCREEN CONTROL

AVAILABLE CONFIGURATIONS:

- ONE TRAY
- TWO TRAYS ON OPPOSITE ENDS OF THE PRESS
- TWO TRAYS ON SAME END OF THE PRESS
- THREE TRAYS WITH THROUGH FEED MOVEMENT AND RETURN UNDER THE PRESS
- FOUR TRAYS WITH THROUGH FEED MOVEMENT, ADDITIONAL WORK STATION AND RETURN UNDER THE PRESS

ALL ABOVE CONFIGURATIONS CAN BE EQUIPPED WITH OUR EXCLUSIVE 'PSS' - PIN SUPPORT SYSTEM