Italpresse Membrane Press Line Lock-Form Through Feed Fluid

OUT OF PRODUCTION

Please see our Estrem or Estrema/S models

Membrane press line to apply veneer skins on 3-D shaped panels (one or two faces).

Composed of:

1- LAY-UP AND LOADING BELT CONVEYOR

• Belt dimensions mm. 1400x3300
• Inverter controlled belt speed max. mt/1' 0-30
• Belt movement synchronized with press belt
• Foot-peal control for belt advance-retrieve movement and cycle start
• Photo-eye control

2 – AUTOMATIC MEMBRANE PRESS

• Weld-free steel ring frame
• Press platen dimensions mm. 1450x2800
• Useful dimensions (approximate) mm. 1300x2600
• Loading side mm. 1450
• Opening mm. 200
• Movement cylinders nr. 2
• Top-down platen movement
• Max specific pressure Kg/cm2 20
• Hydraulic power Kw. 5,5
• Press belt speed mt/1' 0-30
• nr.1 membrane on top platen
• second membrane for two-faces lamination (optional)
• Max. useful thickness mm. 55
• Heating system with thermal oil electric boiler and heat-exchanger for membrane fluid
• Working temperature about °C. 120
• Granted minimum temperature all over each panel °C. 85
• Automatic opening with timer
• Mobile platen guides with rack-pinion system and torsion rods
• Independent temperature control for platens, membrane fluid, thermal oil
• Safety end-stroke switch

3 – OUTFEED GRAVITY ROLLER CONVEYOR

• Useful dimensions mm. 1400x3300

4 – CONTROL BOARD

• PLC CYCLE CONTROL WITH DIGITAL OPERATOR INTERFACE

CE SAFETY STANDARDS