HAWE Pressure Switch DG 1 RUS

SKU
DG 1 RUS
HAWE Spring loaded piston type pressure switch, model DG 1 RUS, adjustable from 20 to 600 bar, plug may be installed rotated by 4x90° (S), dial is rotated by 180° (U)
Non-Stocking Item
Lead Time 3-4 weeks
$715.00
  • Pmax: Adjustable from 20 to 600 bar
  • Design: Spring loaded piston type pressure switch, zero leakage
  • Temperature: Ambient: approx. -40...+80√•¬°C
  • Pressure fluid: Hydraulic fluid acc. to DIN 51524
  • Viscosity range: min. approx. 4; max. approx. 1500 mm2/sec
  • Optimal operation range: approx. 10...500 mm2/sec

More Information

More Information
Description

Pressure Switches are used to issue an electrical switching command or signal for further operations when a predefined pressure value is reached. Different versions (with pressure setting on an adjusting knob, main and secondary switch, screw-on pressure switch) enable their use in a wide range of applications.

A design-related difference (hysteresis) of 8... 20% is to be expected between the upper and lower switching point in piston-type pressure switches. In contrast to this, the type DG5E and DG6 electronic pressure switches provide the option to select two independent pressure switching points and/or program or adjust the hysteresis. Type DT is an analogous pressure sensor.

Electro-hydraulic pressure switches are devices which close or open electrical contacts when pressurized (DIN ISO 1219-1). They are usually used for all applications where a electrical signal should be triggered whenever the set pressure is achieved or exceeded. This signal may be utilized to start a subsequent operation cycle (operation of a solenoid actuated directional valve) or to stop an operation cycle (cut-off of the pump drive, idle position of a solenoid actuated directional valve).

Valve Flow Pattern N/A
Valve Size N/A
Valve Function N/A
Copyright © 2008-present ETK International, Inc. All rights reserved.