Italpresse Hydraulic Press PV/100 CL-2/4

For bending or gluing at the same time, by radio frequency generator

• - Platens No. 2
• - Daylights No. 1
• - Cylinders stroke mm. 1200
• - Total opening mm. 1800
• - Down-stroke movement
• - Total thrust tons. 100
• - No. 4 double effect thrusting cylinders diam. 120/85
• - Vertical thrust adjustable by means of a pressure gauge
• - Hydraulic unit power Kw. 5,5
• - High speed approach, slow speed with soft pressure
• - Automatic reset of the pressure during pressing cycle
• - Group of adjustable double effect side cylinders one at each side for difficult shapes, complete with the possibility to adjust them vertically through the holes in the press frame.
• - Total of side groups No. 2
• - No. 2/4 of side cylinders diam. mm. 120/85
• - Cylinder’s stroke mm. 650
• - Thrust per each cylinder Ton. 25
• - Side thrust Ton. 25+25 or Ton. 50+50
• - Single and independent control for the side cylinders
• - Exit speed adjustable electronically
• - Horizontal thrust adjustable by means of a pressure gauge
• - Safety system composed by two vertical sliding nets located on the front side and fixed safety nets positioned all around the remaining sides including the radio frequency generator.
• - CE safety standards INCLUDED

- PLATENS dimensions mm. 1800x800 loading side mm 1800

- PLATENS dimensions mm. 1800x1000 loading side mm 1800

- PLATENS dimensions mm. 2000x1000 loading side mm 2000

OPTIONAL

- POSSIBILITY TO TILT THE CYLINDERS 15°

- CONNECTION BETWEEN HIGH FREQUENCY GENERATOR AND ONE PRESS